 |
 |
How are Bead Sprouts shipped?
|
|
 |
Beads Sprouts® come packaged wrapped in a clear plastic protective cover and securely attached to a heavy-stock paper support that is printed on the front with the Bead Sprouts logo and bearing a card describing the design of the enclosed Bead Sprouts plant hanger. The back of the paper support is printed with instructions for attaching your Bead Sprouts hanger to your hanging basket. Your order is bubble-wrapped and boxed in a heavy cardboard box. Standard shipping for each order is either by Federal Express Ground or UPS Ground.
|
|
|
How do I install my Bead Sprouts?
|
|
|
After purchasing your favorite plastic or wire hanging basket, you are ready to replace dull, factory wire hangers with your new colorful Bead Sprouts for everyone to enjoy. NOTE: Bead Sprouts recommends a hanging basket diameter not to exceed 12 inches.
| Step 1: |
Remove the existing wire or plastic hanger on your flower or plant with your favorite pair of needle-nose pliers. |
| Step 2: |
Insert the exposed wire end of each strand of the Bead Sprouts hanger into each pre-made hole in the factory hanging basket. NOTE: Factory baskets/pots are typically manufactured with either three or four pre-made holes. |
| Step 3: |
Again using your favorite needle-nose pliers, carefully bend each end of the Bead Sprouts hanger strand around the hole until snug and secure. |
| Step 4: |
Hang your new Bead Sprouts-accentuated plant on a sturdy hook for everyone to enjoy! |
|
|
|
Are Bead Sprouts for indoors or outdoors?
|
|
|
Bead Sprouts are made with high-quality glass beads that work beautifully indoors or outdoors. For best results, place the hanging hanging basket where plants can get sunlight. The light bouncing off the multi-colored beads of the Bead Sprout hangers will create additional viewing pleasure.
|
|
|
Will Bead Sprouts work with a wire hanging basket or only with plastic?
|
|
|
Bead Sprouts are a great way to add some color to a wire hanging basket. Follow the same installation instructions as above. If there is no rim with factory-drilled holes, simply use your needle-nose pliers to wrap the wire end of the Bead Sprout around the top wire of the wire hanging basket. Line with moss or another planter lining and fill with your favorite plants!
|
